HP scanner is always the first choice for users, but due to some technical faults, often it is found that the users get frustrated while working with HP scanners. One of the most common errors that frequently appear while working on the HP scanner is HP Error Code 22. This error may appear due to applying some extra pressure to the scanner glass at the time of scanning. When you try to scan documents or files, then if suddenly an error message appears on your screen, then it might annoy you. Usually, the weight or pressure sometimes hampers the scanner mechanism due to which this error occurs. However, you want to immediately get rid of error code 22 in the HP Laserjet Pro Scanner.

Every Printer user is well aware of how much printers have helped in making their work easier. Whenever if you want to Scan documents or scanning photos, HP Scanners are definitely a blessing.

Even though they are very reliable and robust, still some technical issues may happen from some time. The Scanner Error 22 is one such kind of technical error that shows up while using the HP printer.

 

There are some reasons which are responsible for the HP LaserJet Scanner Error Code 22, including the following:

  • The Scanner you are using is not set to Detecting the computer properly.
  • Pressure& Weight on the scanner can make a scanner bad.
  • There are conflicts in the Scanner.
  • Due to power connectivity.
  • Method 1: Check the Power Cable
  • In order to fix the issue, you need to follow the steps described in the section below. It is recommended not to skip any steps.
  • Step 1
  • At first, turn on your printer. To proceed further, wait until your printer comes into its idle steps.
  • Step 2
  • After that, disconnect the power cable from the area of the wall outlet and wait for a minute.
  • Step 3
  • Next, connect the power cord back to the area of the wall outlet. Then, connect the power cord utility back to the rear of the printer again. After that, power on the printer.
  • Step 4
  • The scanner may now go through a warm-up phase where the scanner lights may be flashing. After that, the cartridges may move thereafter. You should wait until the warm-up period finishes.
  • At last, you need to check whether the issue gets resolved or not.

Method 2: Restart the Scanner

If you are facing the error code 22 on your HP scanner, the most effective solution will be to restart the scanner. To do so, at first, you need to power off the scanner and remove all the cables and cords that are connected with the scanner. After that, wait for a while and then connect all the power cords to the scanner. Then, power on the scanner.

Hopefully, using these fixes, you will be able to fix the situation of HP scanner error 22 on your own.

For detail solution get in touch with us or visit us HP Error Code 22