In order to ensure a proper functioning of your Netgear Orbi and satellite, you must update the latest version of firmware on your devices. Both the devices i.e Orbi satellite and router are intended to update their firmware automatically. But at times, Orbi satellite fails to update the firmware and results in a plethora of issues.

If you are facing the same issue as well, refer to our demystify troubleshooting guide. In this troubleshooting post, we have tried to cover various workarounds to fix the ‘Orbi satellite firmware update failure’ issue. Let’s dive in!

Steps to Troubleshoot Orbi Satellite Fails to Auto Update The Firmware

Walk through the fixes mentioned below to resolve the auto firmware update issue:

Power Cycle Your Device

To do so:

  1. Unplug your Orbi satellite and wait for a few minutes.

  2. Power on your device back again.

  3. Also, disconnect all the wires such as Ethernet cables or power cords that are connected to your satellite.

  4. Wait for some time and then connect the power cords or cables back into your Orbi.

Now, access the default orbilogin net web page to check whether the satellite has started to search for an auto firmware update or not.

Reposition Your Orbi Satellite

Locate your Orbi satellite near to the router. Also, ensure that the power outlet you are using is nearby your satellite. Doing so perhaps ensure that your satellite is getting enough WiFi signals to perform auto Netgear firmware update process.

Also, it is recommended to place your devices away from interference-creating WiFi and Bluetooth devices, thick walls, cordless phones, baby monitors, security alarms, etc.

Check the Status of Internet Connectivity

Check the speed of your existing WiFi network and ensure that it is sufficient for your Netgear Orbi and its satellite. On the off chance that the WiFi signal strength is weak, try to reset Orbi once.

These steps may fix the firmware auto update issue with your Netgear Orbi satellite. But still, if the same issue continues to appear, update the firmware of your Orbi satellite manually by simply following the steps mentioned in the upcoming section.

How to Update Firmware of Orbi Satellite Manually?

  1. First and foremost, visit the Download Center and search for the latest version of Orbi satellite firmware available.

  2. Once found, download it on your PC or laptop.

  3. Now, open a web browser on a device and enter orbilogin.com in the address bar field. To prevent Netgear Orbi login issues, do not use the browser’s search bar for entering the web address.

  4. Type the default Orbi login credentials and click on the “Sign In” button.

  5. After logging in successfully, locate the Firmware Update button and click on it.

  6. You will now see that Netgear Orbi firmware update process has been stared.

  7. In the event, your web browser asks you to re-login, enter the admin details for signing into your Orbi account.

  8. Afterward, upload the downloaded firmware file you have saved on your desktop or desktop.

  9. Wait for some time until the Netgear firmware update process completes successfully.

Kudos! You have updated your Orbi satellite firmware successfully. Updating the firmware might fix Orbi setup issues.

It is advised – first go through the troubleshooting steps in order to fix the firmware update failure issue with ease. If the above-mentioned steps don’t work for you, opt for updating the firmware of Orbi satellite manually. And, if you still have any issue, feel free to contact our veteran technicians anytime. Just ask for Netgear Orbi support and they will provide you with quick solutions to troubleshoot the issues whatsoever you are facing.