Vacuum booster or vacuum brake booster is a type of brake installed in vehicles. It usually consists of a vacuum servo that is a mechanical component in the braking system. It uses a depression that creates a vacuum to boost the brake system. Also called a brake booster it has several benefits over the traditional braking system that every other vehicle has. Brakes are an important part of a mechanical system, and you cannot control your vehicle without the braking system. It does not just help in starting and stopping the vehicle but is also required for proper maneuvering.
Working Features of Vacuum Booster:
The working of a Vacuum booster is a very simple process. It is much simpler than the hydraulic one. In the hydraulic brakes, the brake pedal is connected to the piston and then to the master cylinder which has fluid in it. This fluid flows to the pressure chamber which then stops the vehicle. The vacuum brake system receives power from the vacuum system made in the engine. As the pedal is pressed this vacuum system creates a vacuum pressure onto the brake booster system and then to the hydraulic flow line which otherwise requires a piston. This pressure stops the vehicle. The mechanical force to the pedal in the Vacuum booster is far less than that of the traditional ones that contribute to its efficient working.
Advantage of Vacuum Boosters:
- These systems give a high output for lesser input i.e. the driver needs not apply long and forceful breaks if needed during an emergency. These brakes are very powerful. A little pressure given to the pedal multiplies and boosts up due to a vacuum in the booster. So, you can easily prevent accidents and you can keep your family safe by using proper vacuum booster in your vehicle.
- They are efficient and reliable as they are subjected to lesser wear and tear. These breaks are efficient as they work and give results in a few nanoseconds. The vacuum booster is very much quick in action and is reliable especially if the vehicle needs to be stopped immediately.
- These breaks being less subjected to wear and tear, and they are very cost-effective. They are one-time investments that go on for a longer time than imagined. These not just help with saving the cost of replacing but are also important in reducing the damage to other parts like the pedals and pistons and the cylinder.
- Apart from this, they come with additional cleaners i.e. either a cabin breather that can take the air from inside the cabin and filter it or the Vacuum booster can be engine booster that is less noisy but at a high risk of getting clogged by mud and dust if not protected properly.
The brake booster is an essential part of a vehicle that not just helps the driver but is also a good investment into the health of the vehicle. A booster may not require frequent changes but there are various signs to look for if a change is needed. If one starts to experience a dull and delayed break, it may be time for a check. It may happen due to worn out vacuum, or inability of the booster to transfer pressure. In this case, you need to change the Vacuum booster. The change should be done professionally and usually from the authentic shop from where the vehicle was initially purchased. Repairing a local shop may lead to frequent damages and also disrupt the mechanism.
If you find any problems in your brake system then you can contact the dealer to check the vacuum booster of your vehicle. They can change the booster or the break oil to fix the issue.