The error with the HP Printer Error Code e3 signifies that there is a carriage jam issue. Specific printer suggestions may take place to resolve a printer error. But, here we have explained the simplest approach to resolve the issue of the printer. If another printer error code e3 comes into view when printing, then there’s no need to bother. We also have explained various steps to deal with the printer error for all printer users who are stuck with the HP Printer e3 error. Thus, cautiously read the steps below and apply the same to resolve the Printer Error Code e3.

It happens that the HP printer e3 error arises on the screen whenever the user tries to take a hard card from the paper. Even when printing papers, few users face the same trouble.

Steps to troubleshoot HP Printer Error e3:

Read the printer troubleshooting steps discussed below to get rid of this irritating printer error. Thus, with the steps listed below, eliminating the printer issue would be convenient for users. Thus proceed ahead and go through the steps provided here.

Clean From the File Menu All Document

  • Look cautiously for the tiny pieces of paper on the input tray area or stuck items.
  • If so, delete all the jammed paper if there is any available.
  • After this, ultimately push a backspace key to instantly clear the network issue.

From the Production Sheet Clean Stuck Paper

  • Clear out the entire jammed paper from the output tray area or stuck objects.
  • Now, delete all of them with care.
  • Confirm that the carriage moves freely after clearing the paper jam.

Guarantee that the Carriage Openly Passes

  • Initially, users are recommended to open the access door of the ink cartridge.
  • Let the carriage become idle now before proceeding with the next steps.
  • Remove the entire power cords and other cables from the printer carefully while holding the printer.
  • Find a few paper jam in the entry area of the ink cartridge, then.
  • If there is any document or object, then separate them cautiously if there is any.
  • Now push it to the right to release the carriage route, and remove the paper if it is accessible.

Connect the Printer’s Wire to the Power Source

  • Eject the printer wire from the side of the printer.
  • Remove the power wire from any surge suppressors.
  • Now to resolve HP printer error e3, plug the power wire of your printer directly into the power source.
  • Now again, connect the power wire to the side of your printer.
  • Finally, start the printer.

Reset the Printer

  • After turning on the printer, disconnect the main printer wire from the power supply.
  • Wait a moment and then connect it back to the power supply.
  • Then again, connect the power wire to the side of the printer.
  • Turn on the printer if it does not get automatically turned on.

After that you would actually print with your printer. If there is yet an HP printer error e3, then your printer can be repaired. We hope that the above solution will help you to get rid of the HP Printer E3 Error. In case if the error code still persists, then don’t lose hope at all. Simply consult  HP Experts available at Uspcsolutions so as to get rid of this annoying error code.