How many m high street light pole should be used is the most suitable for the lighting system. Let NC Lighting fix this problem in the article below:
1. Standard set of street light poles
Before constructing the public lighting system, each speculator needs to have a clear understanding of the lighting standards, including:
Standard TCVN 7722-2-3:2007: Regulations on structure and design of lamp poles. The nominal height of the pole-mounted luminaire, the hole in the pole-to-column gas lamp pole approaching with electrical equipment, connected to the cable of the pole-mounted gas lamp
High voltage lamp pole standard TCXDVN 333-2005: Regulations on standard design of lighting poles using discharge lamps (fluorescent, high pressure mercury, Metal Halide, high voltage sodium, low pressure sodium) , incandescent bulbs, high power LEDs.
Standard 20TCN 104:1983: Specifies standards on design of commune roads and urban squares. This standard defines specific requirements and criteria for the design of street lights in town and square in urban planning.
Standard 11TCN 19:2006: Regulations on electrical equipment, electrical wiring systems, overhead power transmission lines, small electrical wiring systems.
National standard for electrical engineering QCVN: QTD-7:2008/BCT: Regulations on site preparation before equipment installation, regulations on laying conductors, grounding, procedures Number and check Project acceptance control.
2. How high should a street light pole be used?
How high is the street light pole? Depending on the lighting area, the Works will choose the appropriate street light pole. Most columns are made from hot-dip galvanized steel.
The column body is usually round or octagonal in shape.
Needle models: loose rod, instant boom, sail.
2.1 Light pole 6m:
6m high pressure lamp pole is commonly applied in the lighting system in residential areas or industrial zones where the area is small and moderate.
Glass streets: Ø150
bottom diameter: 60
Thickness of corrugated iron: 3-5mm
Light rod: 1.5m
Lamp power: 150W
Lighting poles are supplied according to international standards. Modern technology, finished processing, is galvanized, hot velvet most of the surface to prevent rust.
2.2 7m high pressure lamp post:
7m high voltage lamp post is mainly installed for commune streets, amusement parks, parks, wharves, wharfs….
top diameter path: 56mm (octagonal), 58mm (round taper).
cylinder head diameter: Ø60.
400 x 400 x 12mm square stamping base.
Heart of snail 300 x 300 Oval 26×40.
Lamp power: 250W
2.3 Lampposts on 8m streets:
The 8m light pole is selected for lighting installation in large spaces, suitable for installation with different types of high-pressure lamps: Vega, Euro Sky, Space, ….
Light poles are carefully designed and calculated based on specialized column calculation software to ensure that they meet the required standards.
The height of the lamp pole is 8m, which is made straight from the rod, without a cross-body weld.
2.4 9m light pole:
On major roads, highways, and highways, you can easily encounter high-voltage light poles. Installing high-voltage light poles to ensure light reaches people so that evening activities take place in the most bustling and safest way.
2.5 10m high pressure lamp post:
The 10m light pole distributed by NC Lighting is suitable for lighting town streets, public lighting, yards, factories, amusement parks, industrial parks…
So, you already know how high the street lamp post is in the above article, right? If you have any questions or need a price quote, please contact:
Transaction office: No. 21, corner 27, lane 106 Hoang Quoc Viet, Cau Giay, Hanoi.
HOTLINE : 0936 084 765
Email: [email protected].
Web: chieusangcaoap.com.
