Do you want to reset Canon Printer to its factory settings? Use the instructions in this article for resetting any type of Canon Printer. Those who have had a printer from Canon should be aware that these printers were designed to provide top-quality performance for their users. However, due to some circumstances, they may cause you to be disappointed. If that happens it is recommended to factory reset Canon Printer so that it can provide excellent performance again.

However, before you reset it, explore other options because when you reset your printer, you’ll erase all settings you’ve made to it. If your printer is showing problems with ink, try to reset the levels of ink for the Canon printer before resetting it in the factory. Without additional effort, let’s know how to reset the Canon Printer in quick steps.

Method to Power Reset Canon Printer

If you don’t want to perform a hard reset to your printer, you can do the process of a soft reset that is essentially the same as the power reset process. If the issue resolves after having a soft reset, it is not necessary to perform a reset. Here’s how to reset your Canon Printer:

  1. In the beginning, you must shut off the printing device.
  2. After that, disconnect the power cable from the power source.
  3. Check that your device isn’t linked to any external devices.
  4. Then, you have to sit for a couple of minutes.
  5. Then, you need to connect the power cable.
  6. Then, switch your printer on by pressing power.
  7. Then, connect the Ethernet cable to it.
  8. The next step is printing a test page and check what issue you are having difficulty with has been solved.

Method to Hard Reset a Canon Printer

It is important to understand that doing the hard reset of the Canon Printer will help you eliminate the issues. However, you’ll lose all the adjustments you’ve made to factory reset Canon Printer:

  1. Find the printer and then press the “Stop” button on your printer.
  2. Continue doing this until you hear the alarm’s ringing sound.
  3. Release the button until you can hear it ring 20 times.
  4. This will reset your device to factory default settings.
  5. Open your PC and reinstall the driver for your printer off your gadget.
  6. Following that, you will need to install the printer drivers again.
  7. After that, plug in the power cable, and switch on your device.
  8. Attach to the printer using an Ethernet cable to your printer.
  9. When you’ve completed the process you have read about then print a test sheet and test if it can help resolve the problem.

Reset Ink Levels on Canon Printer

If your printer needs to refill the cartridges in your ink or is getting old, you should reset the levels of ink on your Canon printer using the steps listed below. It is possible to follow these steps before thinking about replacing the cartridges completely:

  1. The first step is to remove the cartridges for ink from the printer.
  2. Place these cartridges into the main channel for ink reset.
  3. Make sure the chip that is in the cartridges of ink is working properly.
  4. Make sure your resetter is in direct contact with the plates.
  5. Then, you hold the cartridge until you can see the LED flickering from the chip’s resetter.
  6. Make sure to wait until this light turns stable.
  7. Remove the cartridge from the place you put it.
  8. Repeat the procedure with each new cartridge.
  9. Install the cartridge once again.
  10. Print a test sheet to see whether the issue has been resolved.

Conclusion-

If your Canon printer doesn’t print after trying these methods to factory reset Canon Printer. It is possible that you have to repeat the same procedure or get help from someone expert who is familiar with the printers. In the next section, we will take a look at a few related questions that can provide greater insight into the subject.