Select info, a print command, Ok; That is how simple and efficient the printing experience has become. This art is given by HP across home and personal use, small businesses to large scale businesses and office printing requirements, to the smart world of portable printing options for the innovators who are always on the go! You see and use this cutting-edge technology in various forms such as LaserJet series, Desk Jet series, multi-function wireless printers, portable photo sticker printers, HP Ink Advantage Ultra printers, HP Tank printers, office laser printers, large format printers and so on.
When you are catered well, reliance on these printers becomes natural. But what should be done when your HP printer faces difficulties completing your print commands? Affording time to run to a technician isn’t always feasible. Sometimes the issues are so small that you can sort them out on your own with the help of simple awareness and some guidelines by us. Therefore, this article is written just to support you on that front. One common error which your printer faces is- ‘HP printer error e3.’
So what is ‘HP printer error e3’ all about?
HP Printer Error E3 is basically a cartridge error. Please keep in mind that it is not an incompatible toner error. It is rather about missing tonner. This error crops up when the flag sensors present on the toners and the cartridge units fail to engage properly.
Causes of HP Printer Error E3
Let’s see why do printers show the HP Printer Error E3
As we have understood that this error shows up when the flag sensors on the toners and cartridges cannot be engaged in the printing process. This can happen due to a few reasons. Let’s have a look at them below:
- The flag sensor gets clipped due to the paper jam in the printer.
- Any foreign element gets in the way of the flag sensor to engage with the steel plate which is present in the printer.
- Lack of use of genuine cartridge and toners that result in non-recognition by the printer.
By understanding the reason for the issue you can better solve the matter carefully and can use the printer in a much better way for future use.
Troubleshooting Steps HP Printer Error E3
Now let’s have a look at the process of how you can sort the issue of ‘HP printer error e3’:
There are some simple instructions by which you can resolve the issue. Please follow the given instructions carefully:
- Connect your HP printer directly to a wall outlet. Please don’t use a power surge or power hub as you need a direct power connection to complete this process.
- Now please have a closer look at the paper tray. Check if there is any paper stuck in the paper tray.
- Now you need to inspect the toner cartridge. Here’s how you can do so:
- Remove the cartridge. Ensure it is free from sealing tape and the orange packing material.
- Now check if there is any damage to the memory chip of the cartridge.
- Carefully check the surface of the imaging drum. It is located at the bottom of the toner cartridge. Please be sure that you don’t touch the roller- imaging drum as any scratch or fingerprint on the imaging drum can cause quality issues on print quality.
- In case you find fingerprints or any scratches or any kind of damage on the imaging drum, you need to replace the toner entirely.
- You can try to clean the contacts and marks that are present on top of the toner with the help of a pencil eraser.
- Now slowly and gradually insert the toner. Observe and look for any
- As you will insert the toner, you will see two contacts s sticking out of a black plastic part that flips up to melt the toner.
- You should try to clean these contacts with the help of a pencil eraser to see if it helps.
- If your printer doesn’t respond, you can try using the old toner to see if it still recognizes it.
- If the above step fails, then ensure you are using genuine cartridges and toners.
- If none of the above steps works, then the issues lie with the hardware of your HP printer. You can contact our team of experts for assistance.
Source URL: HP Printer Error E3
