You may still face the log in issue even after following the entire login process correctly. That is why we have mentioned some advanced troubleshooting process to resolve your entire problems related to router.asus.com login and setup.

  1. Unplug the connected Ethernet cable from the router and the computer.
  2. After that unplug the power adapter from the electric power outlet to stop the power supply.
  3. After, sometimes connect the power line adapter of your Asus router back to the power resource.
  4. Press the power button given at the back of the router and turn the power on.
  5. Now locate a reset button on your router and find a reset pin.
  6. The reset pin will be used to press the reset button. Press and hold the Router Asus reset button for ten to twenty seconds.
  7. After that release the reset button and let the router gain its default settings.
  8. When you are done with the reset process, log in back to the router’s login page using the default username and password.
  9. The default login credential for your Asus router is admin and password.
  10. If you confront any issue during the reset process then contact our technical experts and get a resolution instantly.

No LED Lights on my Asus Router

  1. If you see no LED lights on your Asus router, then you should check that your router is powered on or off.
  2. Check the connected cables. The Ethernet cable should be connected to the router’s LAN port in a proper way.
  3. Make sure the Ethernet cable on your computer and modem is also connected properly.
  4. If your cable is damaged then use another Ethernet cable to connect your router, modem, and devices.
  5. Try flip-flopping the cord so that the router ends go in the router computer and the computer end goes into the router.

Entering an incorrect IP address 

Next, make sure that you are not using any incorrect IP address.

For example, these examples are incorrect and will never work:

  • Http://192.168.1.1
  • www.192.168.1.0.com
  • 192.168.0.1.com
  • 192.168.0.1.2

In front of the numbers that you enter into the address bar of the browser, it is not necessary to put the HTTP:// or HTTPS:// for example http://192.168.1.1

Typing HTTP:// is fine if typed in the correct way, but keep it simple. You should not put in more than the requirement as it increases the chances of mistakes and consumes more time. Just type the IP address adding only numbers and dots. Let the browser automatically catch the HTTP:// portion in the beginning then press Enter button.

How do I make a Hard Reset to my Asus Router?

  • To reset your Asus router press and hold the Reset button while the router is still powered on.
  • You have to use a reset pin or a sharp-pointed object to press and hold the reset button for about 10 to 15 seconds
  • The power indicator on your Asus router should start flashing upon a successful reset.

During the hard reset process of your router, Asus only powers light blinking and after 1-2 mines the other lights will also start blinking. There should be at least LEDA 4 LED lights that must be turned on. These are Power, Internet, 2.4GHz and 5GHz.

How to fix: Asus router connected but no internet access

1. RESTART THE DEVICES

First of all the easiest solution is to Restart your devices, like the router, computer and modem. The good way is to reboot your devices. By rebooting the devices you may fix many software problems and Asus router firmware login and network issues. Turn off both the router and the modem and wait for about 20 seconds before restarting them. Moreover, you should also restart your computer to ensure things are working properly. Once all done and the devices are reset, try reconnecting to see if it works.

2. FLUSH YOUR ROUTER DNS

The second and the most common problem can be with your DNS server. Sometimes, the conflict between your DNS cache can lead to not being able to access the router.asus.com problem. You would think that the internet is not working. In that case, you should flush DNS to resolve any trouble. This can be a problem if you use your ISP default DNS. You may also try to use Google or Cloud flare or any other DNS provider. For DNS flush in your windows start menu and type the abbreviation “cmd” and open it as an administrator using your computer.

As you see the command prompt has opened, type “ipconfig /flushdns” and press the enter key. This will flush the entire DNS cache.