What is submersible water pump?

Submersible pump is closed coupled type electric submerged pump. The electric motor has been used is fully hermetically seal with closed coupled with pump. It is converting rotating energy of the pump impeller to kinetics energy, and due to its body construction, its convert to pressure energy. The big advantages of submersible pump type are cavitation will not operate in this type of pump. This types of required a positive head, no need for priming due to submerge the full body of are pump. Less electricity required to operate because less torque required to rotate the assembly of the impeller. Submersible pump is a type of centrifugal pump close couple. Submersible pump is available for a verity of application, such as semi-solid liquid transfer, water transferring, and it is also use for transfer clean fluid.
Best article on selection of        Centrifugal pump 

Working principle of submersible pump

The working principle of this pump simple as the single stage centrifugal pump. When electricity is given to the motor, the motor start rotates to the pump shaft. Due to this section, pressure is developed inside the casing of the pump, liquid start coming inside the transfer, pump casing and containing this operation until the motor stop and pump impeller push the liquid into the discharge pipe. Discharge of the liquid is initiated due to continuous liquid filled up in pump casing, this is the simple working principle for this type of from pump. This type of pump is applicable with horizontal motor arrangement and vertical motor arrangement with pump. And this is used where the positive suction is present or excessive water is available, like worksite, flooded, basement in construction sites, and this is also use for transfer for slurry liquid. The dry run of this type of pump is a danger for it, could be causes of catastrophic failure of the pump and higher maintenance.

What are the types submersible pump?

There are mainly six types of submersible pump uses now day these are followings
  1. Utility types pump.
  2. Grinder type pump.
  3. Deep well pump.
  4. Bladder type pump.
  5. Bottom suction pumps (bore well type pump).
  6. Fountain pump.


How to select the best submersible pump?

There are many factors responsible for select a good submersible pump. These factors are described below.
  1. How much liquid has to be discharged?
  2. What is the size of tanks? Are wells where pump to be installed?
  3. How many heads to be need it means elevation to discharge.
  4. Rate of the discharge of flow
  5. Pressure requirement
  6. Temperature of the service liquid.
  7. Nature of the service liquid
  8. Power consumption of the motor and economic condition of the user.
  9. This is available in 1 hp to 250 hp powers.
  10. Capacity is approx. 20 to 28000 liter per minute. And total head approx. .4 bar to 6 be………………………………………………… TO LEARN MORE

To learn on the best article for choose couplings for your PUMP