Eight Top Reasons for Salt Lake City, Utah Toilet Repair and Replacement Services
Are you having problems with your toilet? There are lots of sources of toilet problems that may require toilet repair or replacement services. Don’t be alarmed!
Any plumbing issue can be easily resolved with Beehive Plumbing.
Listed below are the top 8 reasons for toilet repair and replacement services.
- Strange noises
The first thing you should do if you’ve been hearing an occasional “ccchhhh” sound is to inspect the tank’s flapper. One of the most prevalent causes of water leaks in homes is worn-out flappers.
- Clogged toilets
Clogged toilets can be caused by flushing paper towels, sanitary pads, wipes, and anything else that is not biodegradable. As a general rule, avoid flushing anything that isn’t feces or tissue paper, even if it’s labeled “flushable.”
- Broken handles
Broken toilet handles are a very common problem. Or your handle may be to lose or tight.
- Water bowl damage
Water bowl damage is usually due to the age of the toilet. Signs you have water bowl damage includes finding leaks on the floor or your toilet bowl just will not stay full.
- Leaks and drips
Toilet drips and leaks have the potential to cause significant property damage. It’s always best to get any toilet leak or drip looked at by a professional as soon as it’s noticed.
- Phantom flushing
Phantom flushing is when your toilet is constantly refilling. This is a rather common problem that requires attention. Phantom flushing can result in gallons of water waste per day.
- Slow tank refill
Is your tank slow to refill? It might be because of one of the following dualthings: a clogged vent, a clogged drain, malfunctioning plumbing, or a blocked pipe.
- Weak flushing
A clog in the trap, a worn-out flapper, clogged rim jets, a defective float, or a problem with the handle and chain are all typical causes of a toilet that has a weak flush.
Beehive plumbing provides both commercial and residential toilet repair services.
Toilet Replacements and Installation
Beehive Plumbing can evaluate the finest toilet replacement and installation choices when repairing a toilet is no longer an option.
Types of toilets to consider when looking a replacement:
Toilets with dual flush are designed to use as little water as possible by using a two-button flush mechanism with a full flush for solid waste and half flush for liquids. The majority of dual-flush toilets utilize less than a gallon of water.
Low Flow Toilets
By using less water, low-flow toilets may help you save money. A low-flow toilet must consume 1.6 gallons of water or less per flush.
Pressure Assist Toilets
These versions, which are best suited for commercial usage or in houses with poor drainpipe carry, use the pressure of the water supply to the toilet to compress air in an inner tank.
When you flush the toilet, pressure water is thrown into the bowl, pushing waste, and flushing it down the drainpipe.
It’s likely that your need for toilet repair or replacement caught you off guard.
We don’t always see these things coming, and issues sometime appear out of nowhere.
Contact Beehive Plumbing to request a toilet repair and replacement quote today!