The CCS2 and CCS4 camera systems

Crane warning systems have revolutionized crane safety practices around the world. They have proven quite beneficial in reducing the risks of fatal accidents, collisions, and overloading crane incidents. Among many types of crane warning devices like LMI and RCI systems, crane camera systems have gained dramatic popularity in recent years.

These camera systems not only allow better visibility for crane operators but also improves and fast-track crane lift speediness and efficiency.

However, many crane operators are still not well-versed in using crane cameras properly. That’s why we’ve curated this detailed guide highlighting the most common mistakes crane operators make when using a crane camera system.

1. Not Conducting Pre-Lift Inspections

Whether you’re using an advanced crane camera system like the CCS 2 or CCS 4 devices or an accurate Load Moment Indicator, you must not overlook crane inspections. Regular pre- and post-lift crane inspections are necessary for reducing malfunctioning risks, adjusting camera angles, and familiarizing yourself with the key camera features.

2. Relying on One Crane Camera System

Crane camera systems are undoubtedly very beneficial and accurate. They help in gauging and mitigating blind spot risks, load imbalances, and positioning loopholes. However, crane operators and riggers must combine the power of crane camera systems with other crane safety devices.

Crane camera systems work great when coupled with a load moment indicator and a wind speed indicator for comprehensive crane surveillance and safety optimization. It’s excellent for improving visibility and surveillance and helps crane operators steer clear of crane disorientation.


Crane camera system by RaycoWylie

Over-reliance on a crane camera system can reduce your command in understanding physical and visual cues, which may lead to misjudgments.

3. Overlooking Proper Calibration

Whenever you invest in a new crane safety product, make sure to call in a professional for proper calibration and configuration. Overlooking this step can lead to deadly crane accidents and also hamper your equipment’s steady operation. Failure to calibrate the camera properly onto a crane can cause fluctuations in crane load distance and depth measurements, leading to accidents.

Check out

4. Not Seeking Training

Every crane operator must be trained and licensed before they can be assigned a formal crane operation job. Similarly, crane operators must be trained in using crane safety and warning indicators devices to ensure maximum performance. Operators must receive comprehensive training on how to calibrate, configure, troubleshoot, operate, and maintain different types of crane safety products.

Recommended Read:4 Reasons to Install a Crane Camera System


Modern crane equipment installed at a construction site

5. Not Monitoring and Acting on Crane Camera Feedback

A crane camera’s basic and primary objective is to equip crane operators with real-time visual cues of their surroundings. These camera systems feature color displays that showcase the job site and crane parts. They also cover the entire crane loading area along with the crane parts like the job, boom, hoist, and man basket.

That’s why crane operators must not overlook any visual cue offered by their crane’s camera device. Doing so can lead to improper decision-making, wrong maneuvering turns, and a higher risk of accidents.

6. Not Understanding Camera Interface

Crane camera systems and other crane safety products like crane wind speed indicators, crane overload systems, and load limiting indicators come with unique interfaces. Their manufacturers design and pre-install a user-friendly interface to allow crane operators to operate their devices.

However, before a crane operator can do so, they must take a trial run for quick and efficient operation Practicing your crane camera’s buttons and controls can help you easily and accurately operate it without running into potential hazards during a lift.

Recommended Read: Here’s How Crane Cameras Help Prevent Blind Spots

Partner with Crane Warning Systems Atlanta Today

Crane Warning Systems Atlanta is a prestigious and renowned crane warning device seller in the US. Its team possesses over 20 years of industry experience and offers the latest crane warning products at the best prices. As an official RaycoWylie distributor, the company sells cutting-edge crane systems, LMI and RCI systems, crane wind speed, and load moment indicators.

Their website also contains the latest product manuals for crane operators and riggers. Call them now for more details.

Crane arms with cloudy sky in the background

Author’s Bio

This post’s author is an experienced crane operator in New York. He has been associated with various popular construction projects across the city and is well-versed in crane safety practices and regulatory compliance assurance practices. He regularly shares his wisdom with Crane Warning Systems Atlanta’s blog readers.