A hydraulic system component called a valve manifold is made up of one or more isolation or block valves. Ball, needle, bleed, and vent valves are typical valve types that make up a valve manifold. By dividing the fluid flow in the system, a block and bleed system in the shape of a manifold valve prevents the upstream fluid from coming into contact with the downstream components.
Nakoda Metal Industries is a leading Manifold Valve Manufacturer in India. We always say that customer satisfaction is our top priority, and we always ensure that our Manifold Valves products provide the ultimate performance, meeting our client’s expectations.
We offer all of our customers market-leading pricing on Stainless Steel Compression Fittings, stainless steel ferrule fittings & Stainless Steel Tube Fittings with a supply of standard, sizes, and varieties available for fast delivery.
The Properties of a Manifold Valve
- Anti-rotational thrust brush to provide uniform packing compression, minimal cold flow channels, and pressure-tight sealing.
- Bonnet/body washer with on-site retrofitting and a 100% warranty on re-sealing.
- gland packing must be adjusted to account for gland wear.
- Positive gland sealing is achieved by an anti-blowout spindle with a high-quality micro mirror stem polishing.
Types of Manifold Valves
Manifold valves are available in different types, each suitable for specific applications. Here are the most common types of valves made by Manifold Valves Manufacturers:
1. Two-Way Valves
Two-way valves have one inlet and one outlet and are used to control the flow of fluid or gas in a single direction. They are commonly used in applications that require on/off control, such as air compressors and hydraulic power packs.
2. Three-Way Valves
Three-way valves have one inlet and two outlets and are used to control the flow of fluid or gas in two directions. They are commonly used in applications that require switching between two circuits, such as a hydraulic cylinder with extend and retract strokes.
3. Four-Way Valves
Four-way valves have two inlets and two outlets and are used to control the flow of fluid or gas in two directions. They are commonly used in applications that require control over the direction and speed of a hydraulic cylinder, such as a hydraulic motor.
Choosing the Right Manifold Valves
A manifold valve’s function is to isolate or restrict fluid flow in the system so that the process medium can be separated from pressure instrumentation. With a block-and-bleed manifold, the residual fluid in the system may be vented or bled off on the downstream side of the manifold while the upstream process media are isolated or blocked from the instruments.
For more details
Mail us: [email protected]
Product Source: Manifold Valve Manufacturer in India