The Glock slide is one of the most important components of your firearm. Proper maintenance is essential in order to keep it functioning correctly and safely. In this blog post, we’ll discuss everything you need to know about Glock slide maintenance so that you can keep your firearm in optimal condition. From cleaning and lubrication to replacement parts and more, you’ll learn all about Glock slide maintenance.
The basics of the Glock slide
Glock slides are the components of Glock pistols that provide protection for the inner workings of the gun, as well as providing a platform for the sights and other accessories. They come in two main forms, the full-size frame, and the compact frame. The slide is typically made from a steel alloy, with polymer parts also available. The slide houses the firing mechanism, which moves the striker or hammer back and forth to fire the cartridge. It also features an extractor and ejector, which help remove spent cartridges and clear any obstructions.
The Glock slide is designed to be easily swapped between frames, allowing for quick customization of your gun. In fact, some enthusiasts opt for an “80 lower” build, where the frame and slide are separate pieces that can be purchased separately and assembled together at home.
In addition to being able to swap out slides quickly and easily, Glock slides are designed to make takedown and cleaning of your gun a breeze. The whole process takes just a few minutes, making regular maintenance much easier than with other guns.
How to field strip and clean your Glock slide
Field stripping and cleaning your Glock slide is an important part of maintaining and prolonging the life of your firearm. The process is relatively simple and can be completed in just a few steps.
First, make sure that your firearm is unloaded and the magazine is removed from the gun. Place the gun on a flat surface. Then, pull back on the slide until the release notch is exposed. This will expose the back of the slide and the 80 lower frame.
Next, use a punch or small screwdriver to press down on the recoil spring housing latch located at the back of the slide. This will allow you to pull back on the slide and remove it from the 80 lower frame. You will then be able to pull out the barrel and recoil spring assembly.
Once the barrel and recoil spring have been removed from the slide, you can begin cleaning. Wipe down all of the surfaces with a clean cloth and lightly oil them with gun oil. Make sure to thoroughly clean any nooks and crannies where dirt or debris may have collected. Be careful not to apply too much oil as this can attract dirt and debris which will reduce the accuracy of your firearm.
Finally, reassemble the Glock slide by following these steps in reverse order. Once everything is back in place, check to make sure that everything is working properly. Your Glock slide is now cleaned and ready for action!
How to troubleshoot common problems with the Glock slide
Problems with a Glock slide can be a source of frustration for many gun owners. Fortunately, most issues are relatively easy to fix, and understanding the basics of troubleshooting can help you identify and address them quickly. To begin, it’s important to familiarize yourself with the parts of your Glock slide. It consists of a barrel, barrel sleeve, barrel bushing, 80 lower receiver, and extractor.
If your Glock slide is not returning to battery, then the first thing you should check is that the extractor is properly seated in its groove on the slide. If it’s not, remove the extractor and reinsert it into its groove. You may also need to inspect the ejector to make sure it is aligned correctly and not obstructed.
Another common problem with the Glock slide is that the 80 lower may become loose over time. This can be remedied by tightening the screws located on the lower receiver. Be sure to use the proper screwdriver size and to not over tighten the screws. If the lower receiver is still loose after tightening, then you may need to replace the screws with longer ones.
If your slide is difficult to pull back or doesn’t return fully after being released, then the springs inside may need to be replaced. The recoil spring and firing pin spring are both easy to access and replace if necessary. Simply remove them from their respective locations on the slide, and replace them with new springs that meet factory specifications.
Finally, inspect the locking block for wear and tear. If the locking block is worn or damaged, then it should be replaced as soon as possible. Doing so will help ensure that your Glock slide functions properly and safely.
In conclusion, understanding how to troubleshoot common problems with your Glock slide can help you keep it in top shape and functioning properly. Knowing the basic components of the slide and how to access them is key to identifying and addressing any issues that arise. With some basic maintenance and repairs, you can ensure that your Glock slide is always in tip-top shape.
Upgrading your Glock slide
The Glock slide is one of the most important parts of your handgun. It houses the barrel, extractor, and firing pin, and it’s responsible for cycling the rounds and locking back on an empty magazine. Fortunately, there are many aftermarket options available to upgrade your Glock slide and make it better suited to your specific needs.
If you’re looking for improved accuracy and a better sight picture, consider upgrading your Glock slide with a set of aftermarket sights. You can also purchase slides cut with different patterns, such as porting or top windows, to reduce the overall weight of the slide and reduce felt recoil.
If you’re looking for more dramatic upgrades, you can purchase an 80 lower kit to customize your Glock slide. An 80 lower kit typically includes a stripped slide that’s already cut to accept a variety of optics, as well as upgraded barrels and other components to increase accuracy and reliability. With the right tools and knowledge, you can transform your Glock into a custom gun that’s perfect for competition shooting or home defense.
