If you are like most people, you probably think of pool heaters as a necessary expense, but not necessarily a high-priority one. After all, it’s not like a broken heater is going to cause any real harm, is it?
Well, let’s put things into perspective. A pool heater that isn’t working properly is one of the main reasons pools are less comfortable than they should be in the summertime. A pool that’s too cold is not only unpleasant, but can also lead to health problems.
Pool heaters are actually one of the most common things that need to be repaired or replaced. In fact, according to the National Association of Home Builders, almost half of all pool heater repairs are due to wear and tear, such as water damage and corrosion.
So, if you’re in the market for a new pool heater, or if your current one is starting to show its age, be sure to consider getting it repaired. There are a lot of benefits to doing so, including:
- You’ll be able to stay comfortable in your pool all summer long.
- Your pool will be less likely to freeze over in the winter.
- You’ll be able to keep your pool clean and free of algae.
- Your pool will be less likely to require major repairs in the future.
If you’re not sure whether your pool heater needs repairs, or if you want to know more about the benefits of repairs, contact a pool service company like Top Pool Heating. They’ll be able to give you the information you need to make the best decision for your pool and your needs.
Types of pool heater repairs that need to be made
Pool heating repairs can be expensive and time-consuming, so it’s important to know what needs to be done if the pool heating system goes down. Here are some common pool heater repairs that need to be made:
1. Replace the heating element
This is probably the most common pool heater repair. Over time, the heating element can become damaged and will need to be replaced.
2. Check the thermostat
If the pool heating system isn’t working, the thermostat may be the problem. Make sure it’s set to the correct temperature and that the wires are properly connected.
3. Check the pool pump
If the pool pump isn’t working, the pool heating system may not be able to circulate the water. Check to see if the pump is turned on and if the water pressure is good.
4. Check the wiring
If any of the wiring is damaged, it may not be able to send the correct voltage to the heating elements. Check to see if there are any broken wires, and if so, replace them.
5. Check the control unit
If the pool heating system isn’t working, the control unit may be the problem. Make sure the power is turned on and that the temperature is set to the correct level.
Different types of pool heater parts and how to identify them
Pool heaters come in many shapes and sizes, and they all have different parts. If you’re not sure which part your pool heater needs, read on to learn about the different parts and how to identify them.
Pool Heater Parts
Pool heaters come in many shapes and sizes, and each one has different parts. If you’re not sure which part your pool heater needs, read on to learn about the different parts and how to identify them.
Pool heater part types include the following:
The heater is the main part of a pool heater. It’s responsible for heating the water in the pool. Heaters come in different sizes and shapes, and they all use a similar type of heating element.
Water Level Sensor
A water level sensor is located near the top of the pool. It’s responsible for monitoring the water level in the pool and activating the heater when the water level is low.
The pump circulates water in the pool to keep it at the right temperature. Pool pumps come in different sizes and speeds, and they all require power (usually electricity) to function.
The thermostat regulates the temperature of the pool water. It’s usually located near the pump, and it uses a temperature sensor to determine the pool temperature.
The controller is responsible for regulating the speed and the power of the pump. It’s usually located near the heater, and it uses a sensor to detect the water temperature.
The heater element is responsible for heating the water in the pool. Heaters come in different sizes and shapes, and they all use a similar type of heating element.
The water inlet is located near the bottom of the pool. It’s used to enter water into the pool heater.
The water outlet is located near the top of the pool. It’s used to exit water from the pool heater.
The information provided on this website is for general information purposes only. The information is not intended to be used as the sole source of information for determining the suitability, applicability, or performance of any product. Always consult with a qualified professional before making any decisions related to the use of products.