Like many other components of our car, the clutch is also important which helps change gears smoothly. Now imagine how it will affect our driving if it does not work properly. There are many reasons for clutch failure and we are aware of them but you have to pay attention to some symptoms like bad smell, strange sound, sponginess while pressing the clutch pedal etc. Some problems arise over time but there are some which are caused by our ignorance and some wrong steps.

If there is a delay in fixing them, then there is no doubt that the clutch will never reach a state of premature failure. With that said, we recommend that as a responsible owner, always get all the parts taken care of by professionals by getting regular Car Repairs in Leicester so that any problems can always be fixed in their early stages.

Do you know that there is a different reason behind every specific problem in the clutch? If not, but if you want to understand all these properly, read this blog until the end.

Wear and Tear—

Clutch failure can also occur when it becomes worn out.  It is neither the fault of the driver nor of the clutch system because all this happens over time and is considered as normal aspect. The parts of the clutch that wear out are as follows-

  • Clutch Disc
  • Pressure Plate
  • Release bearing

And the reason for this is that there is friction in the gears every time you shift them. Yes, we must say that the clutch will start to wear out and break down very quickly if they are experiencing all of the following things:

  • You make frequent long journeys.
  • The daily usage period of your vehicle is longer.
  • If you use it at high speeds, there will be frequent gear changes and that too in an improper manner.

That’s why routine check-ups and maintenance of clutch and others can support to detection and fixing the all problems before they turn into a major.

Overheating— 

When the clutch system starts experiencing excessive heat, it also becomes a reason for its breakdown. Now you must be wondering why so much heat is generated, right? Well, there are some specific reasons behind it like bearing the total heavy load of the car, driving the car on brakes which leads to excessive use of the clutch and driving on a very busy road. Usually, as a result of the effect of overheating, the clutch disc gets bent or stretched out of its original shape and such things lead to the loss of adequate friction. If you want to prevent this problem, then you have to keep the following things in mind while driving:

  • When it comes to shifting the gears, gradually keep releasing the pedal.
  • You need to meet the proper gear selection for your driving speed, stop and stop-and-go conditions because this ensures ideal changes.

Contamination 

Another common cause of a bad clutch is contamination. Water, grease, oil and even dust interfere with their proper functioning due to which they lose the required friction causing them to slip. Mostly contamination occurs when some lubricated substance from the transmission system, or engine leaks and reaches the clutch parts. So it is your responsibility to get your vehicle checked after a certain period. If in the meantime you also notice some suspicious signs like leakage then do not take them lightly.

Problematic Hydraulic System 

The pressure we apply on the clutch pedal is transferred to the clutch assembly with the help of the hydraulic system. When they experience any kind of problem like loss of bubbles in the lines, wear of the master cylinder or holes in it causing leakage, the working process of the clutch is not complete and it is a sign of clutch failure. We would like to tell you that it is important to always maintain the optimum level of hydraulic fluid and this is possible only when it is checked regularly. If you feel that the gear is not changing smoothly or there is a soft or spongy feeling in the clutch pedal or you find signs of a leak, you can also identify this problem yourself

Bad Driving Approach 

When we drive with improper approaches, it not only causes the clutch to fail but many other components as well. Many drivers ride on the clutch and keep pressing the clutch pedal continuously while driving and suddenly hit the clutch. Such activities cause them to feel overworked which leads to premature faults and wear. If you want to avoid this problem then first of all you should know what is the correct technique to change gears properly, when to release the clutch while doing all this and how to reduce the unnecessary pressure of the clutch.

That is why it is important to regularly send your car to the auto workshop to cover Clutch Repair in Leicester. All this will help you save money on major repairs. If the condition of the clutch deteriorates beyond a limit, the only solution is to replace it.