Having a clean and presentable house is very important, which begins with a clean concrete driveway. If you’ve typed in concrete driveway near me or are interested in a concrete service, this guide to pressure washing your concrete driveway can be helpful to save both time and money while maintaining the appearance of your driveway. Below is the detailed procedure that one can use in a pressure washer for a driveway.
Gather Your Equipment
First of all, it is necessary to buy a good pressure washer to work with blowing cleaning tasks efficiently. A pump with a pressure capability ranging between 1,500 and 2,500 PSI is suitable for concrete. So, before cleaning a concrete surface, you need to make sure that the detergent is appropriate to be used on the kind of surface that you have decided to clean and other accessories such as the spray gun or surface cleaner, among others. This is the reason why safety goggles, gloves, boots, and other protective wear, such as durable overalls, must be worn.
Prepare the Area
Firstly, one should clear the small litter in the form of fallen leaves, soil, or stones to have a better ground to start on. First, sweep the entire length of the large driveway and if the area is too dry, it would be wise to wet it a little, as this makes the detergent stick to the ground. It is also important not to use a pressure washer on a hot sunny day since the action may lead to the development of cracks in the concrete base.
Apply the detergent.
The concrete cleaner must be diluted with water according to the recommendation given on the package, then the solution must be applied to the driveway via the pump sprayer or the detergent gadget of your pressure washer. It should be left to stand for 10-15 minutes. This dwell time assists in softening the stains and other grime that may be on the surface of the material.
Pressure Wash
Starting from the inconspicuous zone towards the centre, you should then begin washing the driveway. It should also be advisable to keep the nozzle of the hose not less than twelve inches away from the surface to prevent any undesirable effect. Cover as many areas in large sweeping motions while ensuring that each stroke overlaps the previous one. In case you have very dense stains, you will repeat the procedure one or two times. Be sure to work systematically and not leave out any part of the body so that consistency is maintained.
Rinse Thoroughly
After washing the surface of the driveway, clean the surface by washing it with clean water. Rinse with cold or lukewarm water to remove the remaining soap and dirt particles still clinging to the garments, skin, or hair with low water pressure.
Dry and Assess
It is then advisable to allow the concrete driveway in Melbourne to dry for some time before proceeding with the work. Check that there is no residue of the required material anywhere on the surface or any stains that may need special attention during cleaning. If necessary, it might be appropriate to add detergent again and pressure wash once more.
After washing and drying, you should seal your concrete driveway for longevity and aesthetics. The need for a good sealant is to provide not only the enhanced look of the items but also to safeguard them against stains, UV rays, and moisture. Seal coating will help your driveway to remain neat in form and thus make it look new for many years hence, allowing it to provide the main entrance for your house to be strong and durable.
