The login process via the Rockspace ap.setup login address is simple. It does not require any external support. It is the default gateway of your router. And is built to take you to the admin panel of your router. Use the following steps to enter into the admin panel of your router using this default gateway.

Step [1]: Connecting the router with the computer

Turn on the Rockspace local router by plugging the power adapter into the power port of the router. And then, plug the other end of this power adapter into the electric socket board. Then use an Ethernet cable to connect the router with your computer. You can configure the router wirelessly also. A wired setup is the most secured.

Step [2]: Opening a web browser

Open the browser from the same computer you have just connected to your router and then navigate the search bar to http://192.168.1.254 or enter just the numerical part of re.rockspace.local and click the OK. Rockspace home page window will unlock on your screen, where you have to enter the username and the password.

Step [3]: Enter the ap.setup default login credentials

At the login window, enter ADMIN as the user ID. And then, enter ADMIN as the passcode for your Rock space wifi extender. After stuffing these two login details, click the Apply/OK tab. Now, go to the admin panel of your router. It is the main window of your Rockspace router. Here you can make settings to personalize the Rockspace ap.setup page.

Step [4]: Further settings

Close the admin panel. And then, login again by entering the username and the password you used to install your router. This step is necessary to confirm the settings made by you. You can also go to the Advanced Setup tab. Here, you can check the firmware update if your router detects it. The availability of the Rockspace local firmware warns to update the firmware of the router also.

How do I reset my Rockspace Router using http://ap.setup?

The default gateway ap.setup plays an important role. It brings your WIFI router to the factory default settings. We do factory default settings in case we forget the password and user ID of the admin panel. You can also use this feature to protect your router. Is it stuck with some malicious file, viruses? Has the data got corrupted? If Yes! You cannot go anywhere. And the WIFI will stop working or will start dropping connection again and again. So, in all such matters, we need a factory reset, follow the steps.

  • As your router has been stuck at a point and is not showing any activity, first turn off the router by removing the power cable and pressing the power off/on the button.
  • Power on the router again. And connect it with the computer. Go to your computer to open a web browser. Then navigate the browser to http://ap.setup.
  • Enter the login details in a combination of username and password. Ensure that the details are correct.
  • Click on the Administration tab, and then click on the factory default tab.
  • Visit under the factory default section and tap on to “Restore Factory Defaults”. Now, your router is on factory default and free from all types of viruses, bugs, corrupt files, etc. Now you can log in again using the default credentials.

How to change the Admin login details on my Rockspace router?

Do you have to change the WIFI password, connect to the WIFI network? Then initialize the process. Once you are connected, open the web browser.

  1. In the URL section, stuff the IP address 192.168.1.1 or http://ap.setup.
  2. As the login window will flash on your screen, make some needful actions over it.
  3. Enter the username ADMIN at the SSID section, and then enter PASSWORD at the password section. Tap Continue/OK to continue.
  4. Now, you have logged in successfully to the ADMIN panel of the router. Go to the menu from the left of this page, and hit the option Gateway>Connection> then to the WIFI.
  5. Now you have scrolled under the private WIFI Network section, and you will see the WIFI name of your router.
  6. Click on the EDIT tab that is next to the WIFI network. If you want to check the current password of your router, then you have to go under the section “Show Network Password”.
  7. Here you can set the new password for your WIFI router by typing the new password in the Network Password field.
  8. Click on the settings and then confirm the changes.

Rockspace local MESH WIFI system doesn’t require an additional router. Even you range extender to increase the signal strength of your home WIFI. The Rockspace ap.setup gives speed and helps to eliminate the entire dead zones from your house. It also helps the users to connect so many wireless devices with the same SSID of the network.