If you have ジュールポッド (Jules pod), it is important to know that you may eventually experience some problems, as with all pods. It is therefore important to know how to fix your pods. Read on to learn some common problems with your device and how to fix them.
A pod system that is not charging
A pod system might not charge because of a faulty charger, a faulty device, the device has a poor connection with the charger and something is wrong with the USB port you are using to charge your device. You should start by cleaning the metal contacts on the charger and device. If you keep your device in your pocket for extended hours, pocket lint and dust can block the contacts. This can prevent the device from making an electrical connection with the charger. Remove the grime using a toothpick if the charging port has been badly blocked. If the pod system is not charging, try connecting it using a different port. Do not attempt to charge a vaping device with the wall adapter for a tablet or a mobile phone. Doing this will cause the battery of the device to overheat. If you are unable to get the device to charge using a USB port, you should try a different cable. If you have tried multiple chargers and USB ports and are still unable to charge, the device is likely faulty. If you try all the above methods unsuccessfully, then you should contact the JUUL company for assistance or get a new device.
Fixing a pod system that is gurgling or spitting
A pod system might gurgle or spit because of excess e-juice being caught inside the atomizer coil assembly of the pod or the airflow chimney. Gurgling and spitting happen because e-liquid is in a place where it does not belong. Excess e-juice enters the atomizer coil assembly of the pod and from there, the air pressure created when you vape causes the e-liquid to flow up the airflow chimney of the pod. The extra juice will cause a gurgling sound when you vape and some of the liquid may even enter your mouth. Gurgling pod systems can be fixed easily. Fixing starts with ensuring that you do not overfill your pod. When you fill your pod, do not try to fill it to the top because you need to leave some room for air. If there is not enough room then you will push the e-juice into the atomizer coil assembly of the pod when you replace the stopper.
You should know that the tendency for beginners is almost always to use a lot of pressure when puffing. Cigarettes have more restrictive airflow than most vape devices. Cigarettes also burn hotter and produce more smoke when you puff harder.
Your ジュールポッド (Jules pod) systems only operate at one temperature, irrespective of how hard you puff. You should puff more deeply if you want more vapor and not harder.
