HP Printers are high quality Printers that print fast prints. Prints produced by HP Printers are produced with vibrant colours. Additionally, Printer ink is also extremely cheap. However, like any other technical device there are some issues that Printers face. One of the most frequent is HP Printer Error Code 0xc18a0206.

The issue is as simple as generating a small piece of paper. If this issue is not taken care of at the right time, you are putting the operation of the Printer at risk. Therefore, it is important to remove the jam paper as soon as possible. That’s all you need to know about paper jam in HP Printer and the best way to fix the problem.

Causes of HP Printer Paper Jam

In order to properly solve the HP Printer Paper Jam Problem, it is essential to know what initially caused the problem. Here are several reasons that cause this problem.

  • Sometimes, the Printer overfills the paper tray in the Printer. The tray is designed for a specific capacity, and filling it can lead to a build-up of jam.
  • Another cause of this problem is the wrong placement of the paper inside the tray. Paper can get stuck inside your Printer if you don’t place it in the tray properly.
  • Using poor quality or the wrong size paper can cause problems. It is important to read the HP print manual to determine the correct size and type of paper for you to choose.
  • In some cases, if you don’t clean your HP Printer, it can collect dust. This interferes with the function of the Printer and can cause the HP Printer Jam error.

Steps to Resolve HP Printer Paper Jam Problem

There are a variety of solutions to solve this issue. Most HP users employ solutions to fix a Printer error.

  1. Check the Front Cover and Input Tray.

Start by inspecting the front cover of your Printer. If you see any pieces of paper that have become jammed, then carefully remove them. To inspect the input tray, follow the instructions below.

  • Connect your Printer and then turn on the Power button.
  • Remove the cable from the back of the Printer.
  • Find the tray for the input and then slowly pull the paper out of it.
  • Examine the inside of the tray and remove any pieces of newspaper or objects stuck in it.
  • Return the Printer to its normal location.
  • Reconnect the power cord and turn on your Printer.

  1. Check the Tray used for Output.

Another option to fix this problem is to inspect the tray that is used for output. To learn how to fix jammed paper on an HP Printer with this method, follow these steps.

  • Turn off the Printer, then unplug your power cord.
  • Look for the tray with the output and remove the jam paper.
  • Try printing again. It should work fine.

  1. Clean Feed Rollers for Paper

Rollers for paper feeding are one of the places where this problem can occur. It is possible to solve the problem with a simple cleaning of the rollers using the steps in the following paragraphs.

  • Turn off your Printer and unplug your power cord.
  • Pick up the tray you are using for input. Then, open it.
  • Find gravy paper rollers.
  • Wipe them down with a damp cloth to remove dust or dirt.
  • Allow them to dry completely before putting them back in place.
  • Make sure you connect the power supply, then start your Printer.

  1. Check the Entire Printer for Jamming

You can check your entire printing device to see if HP Printer is jammed or not. Follow these guidelines.

  • Access the back door of your Printer. Check the interior of the device for paper that is jammed.
  • Check the rollers and pull out any jammed paper.
  • Then, put the rear opening door in its proper position, then press the ‘Resume’ button.
  • Lift the front cover of the Printer.
  • Check for paper that has jammed and then carefully pull it out.
  • Verify that the printing carriage is fully functioning.
  • Rotate the rollers of the car three times while moving it upwards.
  • If you find that the rollers and carriage are stuck, look for the paper stuck there.
  • Remove the front cover of the Printer, then put the paper in the tray.
  • Press and hold the ‘Resume’ button.
  • Release the button once you see that the test page is printing.

Solutions to HP Printer Paper Jam in Various Printer Models

There are different resolutions for specific devices to solve the jam problem. Below are detailed instructions for the different models.

HP 1320 Printer Paper Jam Problem

Find a solution to the jammed paper in the HP Printer by opening the cartridge door. Uninstall the cartridge and then access the output directly from the door. Rotate the lever to release the green pressure. Remove the jammed paper and then put the cartridge in its place. Close the door.

HP 8500a Printer Paper Jam Problem

Look for any visible areas of jammed paper. After that, check the carriage route that your Printer follows. Reset your Printer’s print head and then clean your Printer’s rollers. Then, you can reset your device.

HP Deskjet GT5810 Printer Paper Jam Problems

To repair a Printer jam, begin by inspecting the input and output trays as well as the print head access points for jammed documents. Check if the print head is working properly. Clean paper rollers and get rid of ink stains. After cleaning your Printer’s rollers in the input tray, reset your device.

HP Envy 5660 Printer Paper Jam Problem

For information on how to resolve a paper jam in an HP Printer, check the output and input trays, the paper path, as well as the location where the cartridge is accessible. Use automated tools to remove smears from your pages. Clean the feed rollers with a clean cloth and then reset your Printer.

HP Envy 5530 Printer Paper Jam Problem

To get rid of your jammed prints, take them off the back roller, input tray as well as the duplexer. Make sure your Printer model is on a flat surface. Clean your rollers.

Conclusion

This comprehensive step-by-step guide will help you solve HP Printer Paper Jam Problem independently. The steps are easy to follow. You can also take help from our experts. Now you will not have to worry about the problem of jam.