A comfortable sleep recharges your mind and body and enables you to function at your full capacity the next day. But, some sleep disorders like sleep apnea can prevent this from happening. This is where a CPAP device comes into the picture. A CPAP or continuous positive airway pressure machine treats sleep apnea by delivering pressurized air into your lungs. So, if you have this condition and are prescribed to use a CPAP machine by your primary care physician, then here is how you can set it up to use it immediately. Have a glace!

Find a suitable corner:
To set up the CPAP machine, find a spot to set up the device. The perfect place can be anywhere- it can be your nightstand or bedside table. Before choosing it, make sure that the spot is close by so the hose can reach your bed. Additionally, it ought to allow unhindered reach to the CPAP machine, so you can turn on the gadget, add water to the humidifier, and open the channel compartment easily.
Check the Filter:
Prior to turning on the machine, you ought to assess the filter. To track it down, adhere to the guidance referenced in the manual or ask your doctor.
Join the hose:
The CPAP machine has a connector for the hose. Fix it in a way, so the hose joins itself easily without being pulled. Its opposite end should plug into the mask and have a tight connection.
Set up the humidifier:
Most CPAP machines have a humidifier to saturate the air and keep the gadget from drying your throat. Fill it with distilled water as utilizing the faucet water might cause the accumulation of minerals. Additionally, be mindful not to surpass the high limit when transferring water.
Plug-in the gadget:
When you know that the power line is plugged into the CPAP machine, insert the gadget into a power plug.
Change the Mask:
CPAP machines accompany a few types of masks. Your sleep specialist will suggest one for you, depending upon numerous variables like how you inhale and your sleep position. Put on the mask and secure it with ties when you are resting. It should seal itself to your mouth but not pierce your skin.
Turn on the gadget:
When you are going to bed, turn on the gadget. If it seems like air is getting away from the mask, it’s an indication that you haven’t put it on accurately. Additionally, when the gadget is on, you can conclude whether or not you want the ramp function.
Lie in a comfortable position:
When the gadget is on, track down a comfortable resting position for yourself. For this, attempt various poses, remembering that your rest position should not obstruct the hose.

So, this is how you can set up a CPAP device for ensuring a comfortable and healthy sleep.