You can’t wash a wrapped vehicle in the way how you are washing an ordinary vehicle. There are some steps that you will need to follow in order to get the job done. Otherwise, you will end up with ruining all the vehicle graphics that you got with the objective of enhancing your branding efforts. Here are some useful tips that any person can follow to wash a wrapped vehicle, without creating any impact on the vehicle graphics.

  • Use the right cleaning products

The very first thing you should do when you wash a wrapped vehicle is to pick the right cleaning products. There are numerous cleaning products available in the market for you to buy and use for washing vehicles. Out of those products, you should purchase a wet cleaner, which is designed for painted surfaces. On top of that, you should ensure that the cleaning product you buy has a pH value in between 3 to 11. It should also be non-abrasive. It is better if the cleaning product doesn’t contain any strong chemicals and alcohol. Then you can keep the peace of mind as you use the cleaning product and wash a wrapped vehicle.

  • Never use cold water for washing a wrapped vehicle

If you use cold water to wash a wrapped vehicle, you will end up with damaging vehicle graphics. Hence, you should ensure that the temperature of water you use for washing the vehicle is in between 70 to 180 degrees Fahrenheit. It shouldn’t be too hot or too cold. In case if you use cold water accidentally, you will end up with shocking the adhesives that keep the wrapping in place.

  • Rinse all dirt

You will need to rinse all dirt as you wash and clean a wrapped vehicle. This is where you will be able to use a trigger type hose nozzle. Using that, it is possible for you to spray water to the surface of the vehicle and get rid of all loose dirt particles. You will also need to make sure that you are not using excessive pressure. To make sure that you never use excessive pressure, you should be holding the nozzle at a distance of at least 12 inches from the surface of the vehicle. On top of that, you must ensure that pressure doesn’t exceed 1500 PSI. The stream of water should not be perpendicular to the graphics that you use as well.

  • Use your hand to wash

It is better if you can use your hand to wash the wrapped vehicle carefully. You can use a soft sponge, rag, or a brush to get assistance with it. Along with that, you can also use a mild liquid detergent and water. As you wash the wrapped vehicle, you will need to do it from top to bottom. You must keep in mind that it is not a good idea to scrub the vehicle as you wash. After applying soap, you will need to apply water at a steady pressure, so that you can remove all dirt.

  • Rinse the vehicle after you wash

Once you are done with washing the wrapped vehicle, you will need to rinse the entire surface and allow it to dry. In case if you can still see dirt, oil, or tar, you should follow the above-mentioned steps and use an appropriate cleaner to remove.

If you can follow these steps, you can make sure that no damages would happen to the vehicle graphics as you clean it. Hence, you will be able to protect the graphics you got for a longer period of time as well.

for more information, visit Turbo Images