HP printers are known for their flexibility and high-speed printing. However, there are a number of cases where you experience difficulties when printing, such as the HP printer not printing in color correctly or a slow printing procedure. So if you are thinking about how to fix hp printer error 0xc18a0206 or if you have had a long delay of HP printer before printing, this blog is right for you.

In this guide, we will provide you with simple ways on the best way to solve these problems without the support of a specialist. But before we visit the solutions, let’s determine why your HP printer prints gradually, for example, if your wireless printer takes a long time to publish.

Reasons why your HP printer prints gradually

It doesn’t matter if your printer is wireless or not, here are common reasons why your prints are too slow:

  • Missing, corrupt, or outdated drivers.
  • A capsule cannot support the printing load.
  • The printer is connected to a shared network.
  • The printer host overloaded.
  • Bad relationships or the USB cable is not working properly.
  • Incorrect printer settings.
  • Paper jam or out of ink/toner.
  • HP ink or toner cartridge problems.
  • Your printing preferences are set to the highest quality.

Approaches to Fix HP Printer Printing Gradually.

1. Evaluate the ink or toner cartridges and the paper tray

Problems with the printer’s toner or ink cartridges, as well as an empty paper tray, can cause the printer to postpone printing. Make sure your cartridges are not running out of ink and that the paper is not empty. You can follow the HP manual on the best way to test toner or ink levels here.

2. Restart your printer and use a different cable

You can solve some HP slow printing problems by taking care of your printer:

  • Unplug the power cord.
  • Wait approximately 1 minute.
  • Connect the power cord to the power source.
  • Connect the power cord to your printer.

3. Update your printer’s firmware and driver

Update your printer’s firmware and driver by following the steps below:

  • Visit the HP software and driver downloads page.
  • Enter the model number of your printer and click Submit.
  • Download all recommended driver packages and install them. Just follow the screen

4. Reinstall your printer driver

  • Uninstall your printer by searching Insert or Remove Programs on your PC.
  • Locate your printer in the output and uninstall it.
  • Navigate to http://www.123.hp.com/ and follow the instructions.

5. Assess the status of your network

  • Evaluate the signal strength of your system. Just go to a computer’s taskbar and click on the wireless link. Place the router, printer, and computer close to each other for a stronger signal.
  • Close the various programs that are not being used. All of these add-ons can slow down the printing process, especially if you have short bandwidth.
  • If you are using an Ethernet cable, make sure the cable is connected correctly.
  • Try restarting your router. Unplug it, wait a couple of seconds, and plug it in.

6. Choose both cartridges to print

Older HP printer versions only allow printing with one cartridge. This considerably slows down your printing procedures. Make sure all of your cartridges are configured correctly. We also recommend replacing empty cartridges.