The water in your wall fountains should be clear and healthy. To maintain its quality, various equipment is essential. These cleanliness aids make your daily life as a pool owner more accessible, from the simplest to the most sophisticated. One needs to consider various things when it comes to maintaining a fountain. It is a good thing to keep it clean to avoid future losses.
Choose the Accessories to Maintain Your Fountains
The most basic cleaning consists of ridding the surface of the water of residues that can soil it, whether tree leaves, other plant debris carried by the wind, or even insects. A landing net may be sufficient for a modest-sized pool. This small windshield can be extended using a telescopic handle to be attached if necessary to target hard-to-reach areas. It is made of aluminum and available in several sizes. It is good for the maintenance of wall fountains.
Its height, when folded, does not exceed 1.80 m so that it can be easily stored in the technical room or a garage. This custom-made handle can also be attached to a pool vacuum. It is available in manual or electric versions. In both cases, it is used to clean up the water line by removing traces of dust or other dirt likely to soil the coating of the pool. Skimmers and water projectors must be brushed so that algae does not develop there.
Robots: Practical For Wall Fountains Maintenance
Nothing like these devices to save time when cleaning your fountains. Designed to brush every nook and cranny of the bathing fountain, they come in three versions:
Hydraulic Models: They are intended for pools of modest dimensions. They are connected to the filtration system. These rather basic robots are not very expensive, but they require a check of the skimmer after use because it could be clogged;
Pressure Robots: They are suitable for all styles of pools; they can be equipped with a bag to collect dirt;
Autonomous Devices: After being charged (electric or battery-powered), they move without being guided and clean everything in their path, including the bottom and walls of the pool.
Other Wall Fountain Maintenance Tips
We tend to forget it, but the booster is part of the equipment kit worthy of the name. This system aims to suck up part of the water and reinject it into the pool with great pressure. It, therefore, generates strong thrusts that can optimize the action of non-autonomous, hydraulic, or pressure robot cleaners. In summer, when solar radiation is intense, it is possible to combine the preservation of water quality with the optimization of this natural heat. A solar cover is an ideal accessory to prevent plant residues from settling on the water’s surface when the pool is not in use during the day. The bathing water thus rises a few degrees. Solar energy passes through this floating bubble web and can raise the water temperature by 8°C. In addition, this solar pool cover prevents water evaporation in direct sunlight. Just place it on the pool’s surface, with the bubbles in contact with the water. It is a good way to ensure the most basic cleanliness of the water while enjoying optimal bathing comfort with wall fountains.
