Before connecting fans to your motherboard, you must know what type of connector you should use. The majority of fans have three- or four-pin connectors. However, you need to check the instruction manual on your motherboard to ensure the correct placement of the headers. You should also know the voltage rating of your fans as most fans run on AC current. Connect fans to the appropriate headers. This article will discuss all three types. Best provider by World PC Tech
PWR_FAN
The fan is connected to the power supply via a PWR_FAN connector. These connectors generally have three pins: a ground, power supply and control sensor. The BIOS settings will not allow the fan to work properly if any of these pins are missing. Additional connections can be made to increase fan speed in advanced refrigerators. The PWR_FAN connector might not be available depending on the manufacturer.
PUMP_FAN
You will need to first connect a water pump, or fan to your motherboard. There are usually several headers on motherboards. One for each system. One header may be for the CPU fan, another for the water pump, and another for an AIO. Connect the fan or pump to the PUMP_FAN header at the motherboard.
DC
Three pins are used to connect DC fans to the motherboard: a supply (12 VDC), ground and signal pins. DC fans can either be powered from a regular power source or the motherboard header pins. Although some computers do not allow this, the signal pin can also be used to monitor rotation speed. You can manually alter the fan speed by changing the voltage to lower levels.
Molex
How do you connect Molex Connect fans to Motherboard? Perhaps you’re wondering if your fan has ever failed. You must properly install fans in your case to ensure that your computer stays cool. A Molex connector makes this easier. This article will help you connect with your fans if you’re unsure. Here are the basics. Follow these steps to ensure that your fans are as cool as they were the day you made them.
DATA
Molex/SATA adapter cable, 3-pin/4 pin fan adapters or fan hubs can be used to add more SATA fans on your motherboard. These cables connect fans to the motherboard’s power source. These accessories allow you to adjust the speed and volume of your fans. Fan controllers can be purchased to give you more control over your fans’ speed. Connecting additional fans to your motherboard may not be as easy as connecting them to the power supply.
USB
There are several options available if you want to connect fans with a motherboard. A mini three-pin connector plugs directly into the motherboard. Although this is the easiest method to install fans it is important that you select the correct connector as there are so many options. If your motherboard has four-pin ports, you cannot use a three-pin connector. Because you have greater control over the speed of your fan, a four-pin connector is better for your motherboard.
Fan header splitter
You must be able to select the right fan header splitter for your motherboard. There are two main types of fan headers, three-pin, and fourth-pin. Three-pin headers only support DC fans, while four-pin headers can support both types. DC fans are usually the most common type of fan, and they are also the most affordable. PWM fans are a better choice because of their speed control and noise reduction. More Information
