A Guideline on the Ways to Choose the Right Air Filter Cartridges by Snapmaker
At SNAPMAKER, we value the needs of our customers which is why we are writing this article to show them the importance of choosing the right air filter cartridge. Why is it important to select the right Filter cartridge for your 3D printer? Well, it is important to do this because selecting the right Air cartridge for your 3D printer would directly influence the air quality in your printing environment and to some extent your health.
When you carry out your research you will get to see that when it comes to choosing the right Filter Cartridge it should mainly be based on several factors. In this article, we will take you through these several factors while deeply explaining each of these factors. We hope that the readers will find this article to be insightful and also that it encourages them to visit our online store. Let’s get started, shall we!!
The factors that we will look at are the cost and efficiency of the Air Filter Cartridges.
We know that the majority of the readers are wondering why we are considering both cost and efficiency as one factor and not as separate factors. There is a reason why we are doing this, and this is because the cost and efficiency of air cartridges tend to go hand in hand in our world of air filtration systems. While we were carrying out our research we found out that efficient filter cartridges tend to cost more than simpler filters with lower MERV ratings. These simpler Air cartridges can also remove smaller particles and more types of pollutants thus producing cleaner air. Unfortunately, these simpler air cartridges have very high resistance to air flow which requires them to be more powerful which in turn means that they require more expensive fans.
This is why it is important to remember that when choosing a filter cartridge for your snapmaker printer you have to balance the need for clean air against the cost of the filter cartridge. Before going to buy a filter cartridge for your 3D printer you must understand your requirements and carry out research before making a purchase.