Septic systems are a necessity that can cost as much as a car. Unfortunately, nobody gives the proper manual on the proper septic systems installation framework needed to start. Many people are not aware of what a septic tank is, as well as its functionality. Many septic systems fail due to the lack of knowledge about systems.
The price of failure when it comes to septic systems is steep. In the United States, around 1,200 people die due to contaminated water, with one of the main causes being a failed septic system. When there is a failing septic system installed in the framework, it can lead to the contamination of water sources. This increases the risk of waterborne disease outbreaks. According to an EPA report in 2000, 31 states listed septic systems as having the second-highest potential to contaminate groundwater. Replacing septic systems is not making the situation any better, as the costs can be very expensive. There are many highly effective ways that a homeowner can take to address the problem.
Before properly discussing the appropriate solution, it is important to understand why septic systems tend to fail. Maintaining a septic system is easier when there is appropriate knowledge about the system. When septic systems install frameworks fail, the tank is not the one failing but rather, it is the drain field soil that has problems. In most cases, the drain field soil fails when it gets plugged with solid waste. Once it gets clogged with solid waste, the liquid will have a harder time flowing through it. If the tank is not pumped, the solids will remain in the tank. One of the main causes for solids to form is coming from the lint in a washing machine.
Ways To Avoid Lint Formation
Avoid Too Much Water Usage
You can damage the septic system by doing large loads of laundry within a short time. Solid materials will settle in the tank when normal septic systems install frameworks. The effluent would flow to the ground. However, if you use too much water in the system where it holds more than it can handle, the excess water can flood your entire system. It may stir up solids, leading it to be flushed out to the drain field before the bacteria can even dissolve it. The solution to this dilemma is to evenly spread your water usage.
Utilize A Washing Machine Filter
Washing machines are one of the main causes of failing septic systems. The main culprit is caused by the lint that is generated from washing machines. The lint can clog the drain field soils. The lint can be so bad that a simple washing machine can produce enough lint in a year to cover the entire floor of your living room. Some nylon traps and lint screens which can be available in hardware shops only trap a very small percentage of the lint. Since the lint is too light and too small, it will not settle in the septic tank but flows out to the drain field where it clogs the soil’s pores. You can prevent any lint from getting into your septic system through the use of a filter on the washing machine’s discharge hose.
Prevent Solid Waste To Leave The Septic Tank First
You need to have your septic systems regularly pumped out with the help of a septic tank contractor. Regular pumping prevents the accumulation of solid waste in the tank. You need to have your septic system pumped every one to three years, depending on its size. You can ask the septic systems contractor to put an effluent filter on your tank’s exit pipe. The filter will stop larger solids from escaping to the drain field.
Monitor Your Usage of Household Cleaning Products
Excessive use of household cleaning products with harsh chemicals may contribute to the failure of your septic system. If you used bleach in one cleaning task, minimize its usage for the remainder of the week. Minimize the use of powdered detergents as it has plastic fillers that can clog your pipes and drain field. Toilet bowl cleaners can be also harsh to the septic system, rendering some systems unusable. If you cannot avoid using these household cleaners, minimize the frequent usage and ensure that you have your tanks pumped regularly to avoid bigger and more expensive issues on your septic systems.