• CCTV cameras record and capture pictures to monitor a property.
  • You may install them yourself.
  • The installation method varies based on your expertise and building type.
  • There are three kinds of CCTV cameras: digital, network, and IP.

To install CCTV, you must first collect equipment, choose a spot for your camera, securely attach your camera, run your wire safely, and then operate your system.


There is no better way to improve a property’s security than by installing CCTV cameras. However, installing CCTV might be scary. Knowing what sort of CCTV camera would benefit your property is one issue, but navigating the installation procedure is another.

In this post, we will explain what a CCTV camera is and how it works. The following section discusses the three different kinds of CCTV cameras. Finally, we will guide you through the CCTV installation procedure.

What is a CCTV security camera?

A CCTV security camera, commonly known as closed-circuit television, is a video camera that transmits a signal to a specified location. Unlike broadcast television, which freely distributes video signals, CCTV footage is exclusively supplied to a single place and often makes recordings and pictures for surveillance reasons. CCTV security camera footage may be lawfully utilized in court. CCTV security cameras often function as a deterrent to crime.

How do CCTV security cameras function?

A CCTV security camera is often put in a key location, such as the entrance to a building. Once installed, it watches a large area and collects video footage.

The camera may transfer film to a local physical storage device or to the cloud, where data is stored remotely. The owner of the CCTV camera may then access and examine the recorded footage.

Most CCTV cameras may be monitored live while recording.

What are the components of a CCTV camera?

A CCTV security camera includes the camera, wiring, and a storage device.

Can I install CCTV myself?

Yes, CCTV installation may be performed separately. A technical background is not required (but it is helpful). You simply need to be able to do basic craftsmanship.

How hard is it to set up a security camera system?

The complexity of installing CCTV is determined by many variables.

These include the building’s infrastructure:

  • Identifying the CCTV camera type being installed.
  • Installation location for CCTV security cameras.
  • The installer’s skills and educational background.

Pro tip: For the greatest results, use an installation specialist. There are CCTV installation services you may hire to assist you or perform it for you. These services are often related with the hardware you bought and may be discovered in the manual or on the company’s website. Alternatively, you might hunt find local installers on the Internet.

How much does CCTV installation cost?

A four-camera CCTV system typically costs between $600 and $1600 to install. If you just need one camera, it will cost you between $100 and $400.

What are the three kinds of CCTV security cameras?

CCTV security cameras are classified into three groups. CCTV installation requirements differ based on the kind of camera.

There are three major kinds of CCTV systems:

  • Digital video recording systems. These systems are hardwired and employ analogue cameras. They are often the cheapest choice and provide minimal visual quality.
  • Network video recording systems. These may connect wirelessly or using Ethernet wires. They include a high-resolution camera.
  • IP cameras. These cameras merely need energy and an internet connection. They then organize and store the recordings on the internet. This information may then be accessible via an app or a website.

What are the prerequisites for installing CCTV?

Now that you’ve learned about the three different kinds of CCTV security cameras, let’s look at the prerequisites for installing one. Depending on the sort of camera you use, you may just need some of the following tips.

To cover everything, we’ve provided instructions for installing all three kinds of CCTV cameras.

1. Collect your items.

Before you install your gadget, organize everything you will need. Preparing ahead of time makes the installation process smoother and quicker.

Required tools include a ladder, fish tape, screwdriver, screws, power drill, and hammer.

Some tools and equipment will likely be included with your CCTV camera, but whatever you currently possess and are acquainted with may be of greater quality.

2. Set the camera’s position.

It is critical to choose the optimal camera angle. The front, rear and side doors of the building are the most probable sites for crime or unwelcome behavior.

Your aim is to minimize the camera’s blind spots as much as possible:

  • Avoid light interference.
  • Use a ladder to elevate your camera at least 10 feet above the ground. This will make it more difficult for anybody to tamper with the device while also providing a better view point for your camera.
  • Stay near an active power source.
  • Select appropriate mounting material (e.g., avoid drilling screws into brick).

3. Secure the camera.

Now it’s time to install your camera on the wall. The gadget will most likely have screw holes. So all you have to do is drill holes in the surface you’ve set your camera on (ideally wood) before fastening it in place. Make careful you use any mounting equipment that included with the camera.

This installation step heavily relies on:

Camera positioning. Step 2 in this tutorial determines if this step is simple or challenging.

  • The physical camera body. We have discussed the numerous kinds of CCTV cameras, but there are hundreds of different CCTV body designs to pick from. Some cameras are small, while others resemble a little R2-D2 from Star Wars. When selecting a camera, look for one with a lens that can be readily attached to your structure.

4. Install the wiring.

If your CCTV security camera has wires, you’ll need to apply a lot of fish tape. The fish tape will hold the wire in place and keep it from bunching up or hanging away from the walls. In addition to being physically pleasing, this will save anybody from injuring themselves on the wires.

Drill holes as required to get the wire through the walls. The purpose of this stage is to keep everything as compact and organized as possible until you can connect it to a power supply and/or an external storage device.

5. Use the system.

Now for the enjoyable part:

Turn on your machine and configure any passwords or personal settings. From here, you should be able to monitor your building’s access points as well as access any services available on your device.

Before you pack away your installation equipment, double-check that your CCTV security camera’s coverage zone is where you want it to be.

Our Services

CopCoder ranks high among Lahore’s top network design and security surveillance firms. IP video surveillance, biometric access control and attendance, burglar alarm, and other low voltage systems are available. This technology permits central monitoring of a building’s interior and outside. It satisfies insurance company criteria with its extensive functionality and high-quality graphics and needs little staff. Our cutting-edge technology let you construct and operate a reliable, scalable, high-performance wired or wireless IP surveillance system that monitors and protects valuables. You may monitor the safety and security of persons and property in Lahore at any time and from anywhere with a networked surveillance system.

Email:  [email protected]
WhatsApp: +92 0337-1474447 / +92 0322-6604101