A miter saw isn’t just an important item of package for specialist woodworkers or contractors; it’s likewise a handy device for DIYers aiming to tackle house restoration tasks.

In spite of just how useful they are, however, a major drawback is just how much area they need.

Not necessarily from the miter saw itself (there are extremely small 8 ″ and 10 ″ versions available, after all), but rather from the space required on either side, especially if you’re reducing longer pieces of lumber.

One option people typically think about, normally if they have actually https://mitersawblackfridaydeals.com/hitachi/ just obtained a tiny workshop or chaotic garage to work in, is to use their miter saw on the ground.

Can you utilize your miter saw on the ground, however, and also is it the very best alternative?

Allow’s learn.

Can You Make Use Of a Miter Saw on the Flooring?

The short response is of course; you can practically use your miter saw on the ground rather than securing or bolting it to a workbench or utilizing it on a devoted miter saw stand.

Can You Make Use Of a Miter Saw on the Ground?

________________________________________

A miter saw isn’t simply a crucial piece of package for expert woodworkers or specialists; it’s additionally a convenient tool for DIYers seeking to take on residence remodelling tasks.

In spite of exactly how helpful they are, though, a significant drawback is just how much area they call for.

Not always from the miter saw itself (there are very small 8 ″ as well as 10 ″ designs readily available, nevertheless), but rather from the space needed on either side, specifically if you’re cutting longer pieces of lumber.

One alternative people usually take into consideration, usually if they have actually only obtained a little workshop or cluttered garage to work in, is to use their miter saw on the ground.

Can you utilize your miter saw on the ground, though, as well as is it the very best option?

Let’s find out.

It’s a trip threat and also can lead to a back injury from handling a heavy saw (frequently 50lbs+) and lumber. A lot of makers suggest bolting down a miter saw before use, which is difficult to do on the flooring but can be achieved on a workbench.

________________________________________

Let’s check out the details reasons that making use of a miter saw by doing this could be a mishap waiting to happen.

The short solution is indeed; you can technically use your miter saw on the ground instead of securing or bolting it to a workbench or using it on a specialized miter saw stand.

Does that suggest you should?

We ‘d claim no– we would certainly never recommend utilizing your saw on the ground, regardless of how easy or practical it appears.

It’s a Trip Danger

To start with, and perhaps the most obvious risk of all, is the trip danger that your miter saw will form if you place it on the floor of your work area.

It’s not simply the miter saw itself you need to watch out for; there’s also the power cable on corded models and the timber hanging off the end of the saw’s table that you will cut.

It’s secure to state that there’s no scarcity of points to trip over and possibly destroy your day if you’re continuously clambering over or around your miter saw.

Not just do you risk of injuring yourself, yet you could visit here also do some costly damages to the saw– for instance, by yanking on the power cord as well tough or by mistakenly kicking the timber, causing it to affect the blade or blade guard.

It Can Lead to a Back Injury

We have actually all heard the advice that states we need to raise with our legs and not with our back.

If you’re anything like us, however, you’ll typically only bear in mind that advice after you have actually currently completed your lift.

After all, we’re all busy, as well as we want to do the job as promptly as possible without thinking of anything that might slow us down. Right?

Well, however, that can come at the rate of security.

If you pick to utilize your miter saw on the ground, the possibilities are that you’ll have to bend over to put potentially heavy as well as large or awkward items of lumber onto the saw’s table.

The even more you do this, the bigger the danger you’ll establish some sort of back injury.

Additionally, while you can locate lighter miter saws on the market, some can weigh upwards of 60 lbs.

We don’t learn about you, however we wouldn’t such as to constantly raise and put down a saw of that weight each time we wanted to reduce some wood.

Water & Electrical Power Do Not Mix

Working with wet ground isn’t particularly enjoyable, although an extra vital problem right here is that water and power do not mix.

Any type of problems with your miter saw, for example, a frayed power line might place you at significant risk if you’re working on damp ground.

A ground mistake circuit interrupter (GFCI), a device focused on avoiding an electric shock when an electrical gadget enters contact with water, can possibly eliminate this threat. Still, the reality remains that making use of a miter saw on the ground isn’t advised anyway, no matter if it’s damp or dry.

It Makes It Harder to Bolt/Clamp Down Your Miter Saw

A lot of tool suppliers advise that you bolt down or clamp down your miter saw, and for good reason.

If you’re cutting a piece of wood that pinches the blade or you run into a hidden nail or particularly hard knot, the saw might experience something called kickback.

When kickback happens, the saw can shift while the blade is spinning, which can be extremely harmful.

Many miter saws have devour points because of this, as shown above.

The problem right here is that if you’re working on the ground, most of the times, it won’t be possible to screw or secure down the saw to prevent any movement throughout cutting.

It Can Be Much Much Less Exact

Until this factor, we have actually concentrated rather greatly on the safety-related problems that come from utilizing your miter saw on the ground.

An additional negative aspect is the fact that utilizing your miter saw this way can be much less precise.

Prior to even switching on the saw or finishing a cut, we like to inspect where the blade will come right into contact with our cut mark to stop mistakes.