Owning a house comes with many new responsibilities. From mortgage payments to renovations, property taxes, and plumbing, you need to be familiar with many things to keep your home happy and healthy. Many homeowners often ask us what a weeping tile system is, what it does, and whether they need one. That’s why we decided to write on the blog all the information you need to know about the weeping tile installation system!
What is a weeping tile installation?
Permeable bricks are a porous piping system. These porous plastic pipes are located underground, around the foundation of your home, and are used for drainage. If leaking tiles are not working properly, the hydrostatic pressure on the ground around your home will build up and cause serious flooding in the basement.
Weeping tiles work to remove excess water. Without these tiles, your home will soon be filled with water. Most houses only need to install them around the foundation of the house, but the system is also suitable for flooded soil.
Types of weeping tile installation
There are two types of weeping tile systems; internal and external. An external weeping tile system was buried in the ground near the foundation wall to help prevent moisture from having a chance to enter the home. On the other hand, an internal system was installed inside the basement, extending along the floor at the lowest point of the basement, to help manage the water that has flowed through.
Internal weeping tiles:
The internal system is installed under your home. A circular saw with a concrete blade is used in combination with a chisel hammer to remove concrete along the perimeter of the base. Then the person installing the system will dig a ditch one or two feet deep. There is already some gravel under the concrete floor. However, you must add more gravel to the trench. Then place the PVC pipe covered with fabric with holes or grooves in the groove so that the pipe drains well without clogging.
It is important to place the pipe groove upward. At this point, you need to lay enough water-permeable tiles on the top of the pipeline and end it at the sewage pump. Then replace the concrete floor. This process may cost less than external installation, but the chaos caused by cutting concrete slabs can be extensive. For an experienced and high-quality team, this confusion will no longer exist after the work is completed.
External weeping tiles:
Laying external systems is similar to laying internal systems. Dig a trench on the periphery of your house. It should be 12 inches wide, with a slope of one inch every eight feet. It must also extend to the basics. It is a good idea to plan so that you can decide in advance where to relocate the shrubs and plants. You will also have a lot of land. The gravel you will add will take up space in the trench. You may need to decide in advance where to put the extra soil.
Next, you will place gravel in the trench. Finally, you will add a rigid PVC pipe with holes. This tube is popular because of its durability. Wrapping pipes with garden cloth is a good idea to prevent roots and other obstacles from entering. It is best to leave a clean joint above the ground for easy maintenance. Covering the pipe with a mixture of large gravel and dirt will help the pipe to drain properly.
The weeping tile installation in Edmonton is labor-intensive, so the capital to install these systems can be expensive. You can install indoor and outdoor systems yourself. However, hiring professionals can save you time and the troubles of study. If you are trying to install these drainage systems, make sure you have done your homework. You need to buy or rent the right equipment for the job.
