What Should You Know About the Saddle Stitched Method?
1. What is saddle-stitched?
Although saddle-stitching may seem like a strange term for a bookbinding method that involves placing wire staples through pieces of paper, stapling is frequently referred to as stitching in the printing business. During the stapling/stitching operation, the collated sheets are stretched over saddle-like equipment; thus, the term is “saddle-stitching.”
2. What is the process of making a saddle-stitched book?
Let’s look at a saddle-stitched booklet with a completed dimension of 8.5′′ x 11′′ as an instance of the building method. This booklet’s contents and cover would be constructed from 11′′ x 17′′ sheets folded in half to 8.5′′ x 11′′. The folded papers would be stacked within each other and secured along the folded crease. This folded crease forms the spine of the book. Four pages of the book are made from each 11′′ × 17′′ sheet folded in half.
The staples hold the 11″ x 17″ pages and cover intact once they’ve been printed, half folded, and stacked together. The book is then compacted by folding the pages and cover closer together. Finally, the open edges are clipped as needed to maintain the pages looking uniform and tidy.
3. What is the highest number of saddle-stitched sheets which can be stitched?
A saddle-stitched booklet’s sheets and cover are stacked together before being stapled and cut.
The highest number of saddle stitch page count books may have primarily determined the thickness of the material used to make it. This is because staples can only hold a certain number of sheets of a particular thickness.
As a basic guideline, a flat booklet with 64 pages or fewer will look great. Saddle-stitched books of 100 pages or fewer can be created if the paper used in the pages is exceedingly thin. The perfect binding and coil binding procedures are advised when the page count for saddle stitch exceeds the method that can allow.
4. Can saddle-stitching be used on books that are extremely little or extremely huge?
Saddle-stitching is suitable for a wide range of book sizes, including mini-books and large volumes. Any book layout – Portrait, Landscape, or Square – works nicely with the saddle-stitch technique.
5. What are the different sorts of books that are saddle-stitched?
Listings, manuals, booklets, programs, directories, multi-page saddle-stitched brochures, pricing and part lists, bulletins, comic books, colouring books, periodicals, wall calendars, and mailings are examples of publications that are saddle-stitched.
6. What are the primary advantages of the saddle-stitch technique?
•It is the cheapest technique of binding.
•The turnaround time is usually quite short.
•It’s suitable for both short and lengthy manufacturing runs.
•For a smaller page count for saddle stitch, this approach is ideal.
•It enables publications to be produced in various sizes, from little pocket guides to huge road atlases.
•A hole can be made along the spine of a book to be inserted into a ring binder.
•Designing it is quite simple, and it can contain artwork or pictures covering two consecutive pages.
•It adds very little thickness or weight to the printing, making it ideal for mailed works.