How do you fix a white sink faucet that won’t shut off? You’re not alone, but there are a few steps you can take to solve this problem. First of all, turn off the water supply in the faucet. By doing this, you can prevent larger flooding problems. To ensure safety, you may want to take the faucet to a store where you can buy the replacement parts.
Need a spanner wrench
A plumbing supply specialist can provide replacement parts for the faucet you’re having trouble with. If you’re working on a cartridge style faucet, first, pry off the decorative cap. Next, use a screwdriver to loosen the bolt. You can also use a scouring pad to clean out any mineral deposits from the cylinder. After you’ve removed the cap, tighten the nut with a spanner wrench.
Contact a plumber
If the faucet’s handle is stripped, you may want to contact a plumber. This can be a difficult problem to handle. In addition to removing the handle, a plumber can check the stem to ensure that the threads are not stripped. The stem uses a washer to distribute the pressure, but if it’s not properly lubricated, the washer can crack. When this happens, the handle will no longer shut off.
Another simple way to repair a kitchen faucet that won’t shut off is to replace the faulty parts. Sometimes, the faucet’s handle screw will be loose. To replace it, you’ll need a screwdriver or an Allen wrench. This can be an inexpensive way to repair the faucet. If the leak continues to occur, you can also try replacing the cartridge. If all else fails, you may need to replace the entire faucet.
Replace the entire faucet
You might need to replace the entire faucet, or just the 0-Ring. A faulty valve seat, a corroded washer, or a rusted 0-Ring can cause this problem. However, you can fix a drippy faucet yourself if you know what you’re doing. Be sure to turn off the water before removing any parts. Inspect the valve seat and washer carefully.
Need a small screwdriver
If the spout doesn’t shut off, check for plugged holes. You can clean these with a small screwdriver or penknife. Once you’ve cleaned these areas, you can try flushing out the accumulated debris by holding a rag over the faucet’s shutoff valve. Next, turn the faucet’s handle back to the middle position and turn the water off. If this doesn’t solve the problem, you can clean the spout.
