Several industrial systems need the use of tube fittings. They come in a range of sizes and forms to suit various purposes, and they are used to connect and detach pipes or tubes. The many kinds of tube fittings will be listed in this blog.
A well-known Swagelok tube fittings Manufacturer in India is Nakoda Metal Industries. We produce SS Swagelok Tube Fitting to accommodate a range of applications. Several quality checks are performed on our Swagelok Tube Fitting products to ensure they satisfy the highest requirements.
What exactly are Tube Fittings?
A fitting is essentially a piece of produced metal that connects one component to another. They can connect the following tube fittings:
- from one tube to another
- a hose to a tube
- a tube connecting to a hydraulic component such as a valve
These fittings have two functions: they seal under pressure and hold the tube in place when under pressure. Making the change from one thing to the next as seamless as feasible is the goal. In the case of tubes, you would place a fitting between the two to join them together as one if you wanted to connect a tube moving in one direction with another tube moving in the opposite direction.
It’s important to first understand some tube terminology because we’ll be talking mostly about tube fittings in this section. The tube OD is usually utilised when discussing fitting sizes (outside diameter). The size designation only refers to the outside diameter (OD) of the tube that is intended to work with that fitting and has nothing to do with the fitting’s physical dimensions. At Nakoda Metal Industries, We manufacture Swagelok Tube Fitting to suit various applications and are Manifold Valve Manufacturers.
Types of Tube Fittings:-
Here are some of the most common types of tube fittings:
Compression fittings: With compression fittings, the tube is fastened to the fitting via a ferrule and nut. As the nut is tightened, the ring-shaped ferrule compresses against the tube to form a tight seal. These fittings are well-liked in situations where routine maintenance is necessary since they are simple to build and remove.
Flare fittings: With flare fittings, a seal is made with a threaded nut and a conical seat. The nut compresses the flare onto the seat after the tube’s end has been flared outward to form a mating surface. These fittings are frequently employed in situations where high pressure or vibration are present.
Push-to-connect fittings: The installation of push-to-connect fittings is rapid and simple. They keep the tube in place via a collet mechanism, and the fitting may be released by merely pushing a release ring. Pneumatic systems and other low-pressure applications frequently employ these fittings.
We also sell ss swagelok tube fitting globally.
Barbed fittings: The ridged end of a barbed fitting is forced into the inside of a flexible tube to form a seal. These fittings are simple to install and remove and are frequently used in low-pressure applications.
Threaded fittings: With a threaded connection, threaded fittings fasten the tube to the fitting. High pressure or high temperature applications frequently employ these fittings.
The kind of fluid or gas being conveyed, the pressure and temperature requirements of the application, and the size and form of the tubes or pipes involved are all key considerations when choosing a tube fitting. For the system to last a long time and be safe, proper installation and maintenance are also essential.
Manufacturer of superior manifold valves and Swagelok Tube Fittings
Nakoda Metal Industries is a prominent Swagelok Tube Fitting Supplier in India.
Our Swagelok Tube Fitting products undergo various quality checks, ensuring they meet the highest standards.
We offer all of our customers market-leading pricing on ss swagelok tube fitting, with a supply of standard, sizes, and varieties available for fast delivery. We are named as one of the best leading Manifold Valve Manufacturers in India .
For more details:-
Websites : nakodametalind.com
Product Source: Swagelok Tube Fitting Manufacturer in India
